Products

MSZ/MCZ 305-x

Optimal cooling by dual-circuit cooling system: The consumables of the torch head are separately cooled and therefore very effective. The coolant flows around the gas nozzle and cut off the torch head quickly large amounts of heat. Due to the sophisticated cooling is the 305 designed for high thermal load. Hence the performance results with the corresponding duty cycles. This secures economic benefits to the user. Thanks a separate shielding gas management in the fittings are gas losses excluded. The very good gas coverage improves the welding result. Also available with SATZ connection for manual Push-Pull torch set MPZ 600-x .
Vorteile
  • High duty cycle due to improved cooling of the gas nozzle
  • Fexible supply hose
  • Bend protection at the plug view
  • Gas nozzle with rugged trapezoidal thread
  • Optimum gas coverage by recessed contact tip
  • Gas reduction by laminare gas flow and design of the gas diffusor
  • No gas loss due to separate shield gas feed
Technische Daten
Standard Angle 45 °
Connection Euro; Dinse; Power-Pin
Cooling liquidcooled
Rating CO2 550 A
Duty Cycle CO2 60 %
Rating Mixed Gas 500 A
Duty Cycle Mixed Gas 60 %
Wire Diameter .047 / 1,2; .055 / 1,4; .063 / 1,6; .079 / 2,0 " / mm
Welding Process GMWA; GMWA
Raw Material Non alloyed steel; low alloyed steel; high alloyed steel; Aluminium alloys; magnesium alloys; copper alloys; nickel alloys
Product Information